ONE SYSTEM - 7 LENGHTS
The GF-Slider System is available in 7 standard lengths. Each basic Slider package includes: 2 precision rails, 2 end mounts with 360° »tooth system« and the tracking carriage with 2 low height adjusters.
Additional, interchangeable rails drilled with 3/8” holes 1” apart are available.
The tracking carriage will accept Bowl, Mitchell and the 80 mm Euro-adapter tube mount. Machining the individual adapters and plates from solid blocks of aluminium ensures a solid, long lasting camera mount.
There is a choice of mounts to connect the GF-Slider directly on to a Mitchell or Euro-adapter type dolly mount. The Euro-adapter mount includes a pan bearing and medium height side plates. The Mitchell mounts are available with or without a pan-bearing for direct connection to the rails. Optional side plates are available to allow for faster horizontal repositioning of the Slider.
SIDE PLATES FOR HORIZONTAL POSITIONING
The side plates, combined with the base mounts, provide a way to quickly reposition the Slider and shift it off-centre. Because of the different sizes, they also offer a second method to adjust height and therefore provide more clearance of the camera head between the tracking carriage and the rail mount.
CARRIAGE HEIGHT EXTENDERS
The basic kit, tracking carriage comes with the low height adjuster, but additional height adjusters are available should the clearance of the camera head need to be extended.
END MOUNTS & ACCESSORIES
The standard end mount is machined with a 360 degree »tooth system« allowing for the connection of various scaffold tubes and levelling leg mounts. It also has a number of 3/8” threaded holes for connecting adapters etc.
GF-SLIDER IN BANGI MODE
The GF-Slider also functions as a traditional »Bangi«. It enables off-set panning and camera tracking for table top shots or to track the camera in and out of tight spaces such as windows, car doors etc.